DOUBLE TAP CONNECTOR & TANK FITTING for WATER BUTT DRUM & TANKS

Double hose tap with tank fitting. Very High quality Taiwan made with my branding, never had a comeback** (there are some rubbish Chinese 2 way taps out there)

The Tank Fitting consists of; a ‘Bolt, two neoprene seals and a ‘Nut’.

This is the BEST tap assy available. If you want to connect two drums/tanks together, simply buy another & link up with garden hose fittings.

This makes a Modular System. you can add more links & drums easily with open top drums/tanks. I sell them already fitted to closed top 200L drums.

Instructions for closed top drum fitment. You only need to cut a 20mm hole about 100mm above the base to fit. You may need to file or rasp the hole a tad so the ‘bolt’ goes through easier. To install: Remove tap, nut & neoprene washer from the ‘bolt’. You’ll need some No.8 wire or a broom handle with a nail or screw at the end that will hold the “bolt” on the inside & guide it thru the bung hole, do this with drum on its side. Tighten nut on to washer till it squashes and you’re done!

*Single tap as in 2nd pic also in listings